恒盈国际彩票,彩票十大网站app,KOK全站首页APP,dafa官网,在线真人AG百家乐,立博官网app下载,亚投彩票welcome网站

Rolling bearing failure
Service support - Product "Three Guarantees service" - Common fault handling

1) Main failure forms of rolling bearings.

Material defects, improper processing or assembly, poor lubrication, moisture and foreign matter invasion, corrosion and overload of rolling bearings may lead to early damage to bearings. Of course, in time when the installation, lubrication and use and maintenance are normal, after a period of operation, the bearing will also appear fatigue spalling and wear.

Rolling bearing failure has many forms, such as spalling, pitting (fatigue) crack, fracture, fouling, wear, softening, indentation, micro-vibration grooving and corrosion.

To accurately judge the bearing failure form, it is necessary to carefully inspect the failed parts; For complicated reasons, it is also necessary to analyze the materials and make a comprehensive analysis of the manufacturing, installation, use, operation and other conditions.


2) How to use and maintain rolling bearings

(1) Avoid bearing injury

The coupling should be installed by the hot sleeve method, not by hammering cold, which will damage the cage and raceway. The spalling on the raceway surface of the inner ring of deep groove ball bearing is caused by the development of indentation caused by impact load during installation.

Avoid indentation when installing bearings; After the motor stops running (or in the long-term storage process), it should be turned regularly to avoid indentation; When lifting the motor, it should fall smoothly to avoid indentation.


16087122716515079UvQ.png1608712302258243ZxxX.png


(2) Avoid bearing water intake and grease deterioration. When the motor is placed on the project site for a long time, it is necessary to avoid the loss of injector and oil pipe; Ensure that the fastening bolt of the bearing device and the temperature probe are tightened.


   1608712340969459GCtt.png


(3) Use clean grease and replace the grease regularly. Especially after the motor is stored for a long time, the old grease should be thoroughly cleaned and replaced with a new grease.

1608712372223050YcKj.png


双柏县| 贡山| 南江县| 无锡市| 广平县| 金秀| 卓资县| 县级市| 山阳县| 伊通| 牙克石市| 建阳市| 马边| 宝山区| 聂荣县| 杭州市| 通州市| 澄城县| 宝山区| 改则县| 新源县| 迁西县| 明光市| 铜鼓县| 南涧| 昌宁县| 林州市| 正镶白旗| 京山县| 巴彦县| 宣汉县| 鸡西市| 汶上县| 长沙市| 红河县| 龙里县| 虞城县| 定南县| 丹凤县| 桦甸市| 雷波县|